Humidity and CO2

For decades JUMO has been offering a very comprehensive and constantly updated device range for measuring relative humidity and CO2 level as well as the measurands which are closely linked to them. The devices have proven themselves both in air conditioning and ventilation technology as well as in demanding industrial applications.

  • Product selection guide
  • Humidity & CO2

Humidity & CO2

Filter
1
Hits: 13
Topseller
Hygro transducer, hygrothermal transducer, and CO2 measuring probe - For facility management and climate monitoring

Hygro transducer, hygrothermal transducer, and CO2 measuring probe
For facility management and climate monitoring Basic type: 907021
This measuring probe is mainly used in heating engineering, air-conditioning, and ventilation technology. It sets itself apart in particular through high measuring accuracy, long-term stability, and chemical resistance.
  • Measuring range: 0 to 100 % RH
  • Medium: air, pressureless
  • CO2 measuring range: 0 to 10000 ppm
Hygro transducer and hygrothermal transducer (capacitive) - For applications in the air-conditioning sector

Hygro transducer and hygrothermal transducer (capacitive)
For applications in the air-conditioning sector Basic type: 907020
This measuring probe is for versatile ventilation and air conditioning applications. It is particularly easy to install, has a robust form, and uses reliable humidity measurement technology.
  • Measuring range: 0 to 100 % RH
  • Medium: air, pressureless (non-aggressive)
  • Pt100 temperature output
Humidity and temperature measuring probe - For industrial applications

Humidity and temperature measuring probe
For industrial applications Basic type: 907023
For measurements in challenging industrial applications and under harsh operating conditions. Also available with calculation and display of dew point / frost point temperature, absolute humidity, mixing ratio, wet-bulb temperature, enthalpy, volume concentration, etc.
  • Measuring range: 0 to 100 % RH
  • Medium: air, hydrogen, vacuum
  • Pressure resistant up to 100 bar
Hygrostats - Hygrometric

Hygrostats
Hygrometric Basic type: 907032
Hygrostats are primarily used as simple two-state controllers to control the relative humidity in conditioning cabinets and air ducts as well as to control air humidifiers and dehumidifiers in the building technology industry.
  • Measuring range: 30 to 100 % RH
  • Temperature: -30 to +60 °C
  • Can be used permanently in high humidity
Hygro transducer and hygrothermal transducer - Hygrometric

Hygro transducer and hygrothermal transducer
Hygrometric Basic type: 907031
The humidity measuring probes are suitable for both air-conditioning applications and humidity measurements in industrial applications. The high resistance of the sensing element to water is an advantageous feature which allows permanent use of the device in high humidity applications through to saturation.
  • Measuring range: 0 to 100 % RH
  • Medium: air, pressureless (non-aggressive)
  • Can be used permanently in high humidity
JUMO Wtrans E01 - Measuring probe for humidity, temperature, and CO2

JUMO Wtrans E01
Measuring probe for humidity, temperature, and CO2 Basic type: 902928
The Wtrans E01 measuring probe is used in combination with a Wtrans receiver for recording measured values using digital sensors for humidity, temperature, and CO2. Other measurands can be derived from the determined measured values.
  • Measuring range: 0 to 100 % RH
  • CO2 measuring range: 0 to 10000 ppm
  • Open air range 300 m
New product
Intrinsically safe industrial measuring probe - For humidity, temperature, and derived variables

Intrinsically safe industrial measuring probe
For humidity, temperature, and derived variables Basic type: 907037
This measuring probe has been designed for accurate and risk-free humidity monitoring in potentially explosive areas. It is mainly used in challenging industrial applications and under harsh conditions.
  • Measuring range: 0 to 100 % RH
  • ATEX approval up to zone 0
  • Pressure resistant up to 100 bar
New product
JUMO hydroTRANS S30 - Humidity and temperature transmitter with optional CO2 module in duct version

JUMO hydroTRANS S30
Humidity and temperature transmitter with optional CO2 module in duct version Basic type: 907043
This humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The duct design is suitable for use in ventilation ducts and lines. The humidity measuring device is available with various interfaces. It is characterized by ease of installation, robustness, and reliable sensor technology.
  • Medium: Air, pressureless (non-aggres.)
  • Duct version (IP65)
  • Temperature range: -40 to +80 °C
New product
JUMO hydroTRANS S40 - Humidity and temperature transmitter with optional CO2 module in rod version

JUMO hydroTRANS S40
Humidity and temperature transmitter with optional CO2 module in rod version Basic type: 907044
This humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The rod version is suitable for use in hard-to-reach areas and ventilation lines. The humidity measuring device is available with various interfaces. It is characterized by ease of installation, robustness, and reliable sensor technology.
  • Medium: air, pressureless (non-aggres.)
  • Rod version (IP65)
  • Temperature range: -40 to +80 °C
New product
JUMO hydroTRANS S10 - Humidity and temperature transmitter with optional CO2 module in indoor version

JUMO hydroTRANS S10
Humidity and temperature transmitter with optional CO2 module in indoor version Basic type: 907045
This humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The room version is suitable for indoor use (e.g. offices, residential premises, etc.). The humidity measuring device is available with various interfaces. It is characterized by ease of installation and reliable sensor technology.
  • Medium: air, pressureless (non-aggres.)
  • Indoor version (IP20)
  • Temperature range: -5 to 55 °C
New product
JUMO hydroTRANS S20 - Humidity and temperature transmitter with optional CO2 module in wall-mounted version

JUMO hydroTRANS S20
Humidity and temperature transmitter with optional CO2 module in wall-mounted version Basic type: 907042
The humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The wall-mounted version is suitable for use in harsh environments such as storage rooms and production facilities. The humidity sensor is available with various interfaces. It is characterized by ease of installation, robustness, and reliable sensor technology. Innovative Single Pair Ethernet technology enables a direct connection to the JUMO Cloud and other automation systems.
  • Medium: air, pressureless (non-aggres.)
  • Wall-mounted version (IP65)
  • Temperature range: -40 to 80 °C
Capacitive hygrothermal transducer - With intelligent interchangeable probes

Capacitive hygrothermal transducer
With intelligent interchangeable probes Basic type: 907027
In this type series the probes are pluggable and replaceable. They are used in various areas such as air-conditioning measuring technology, the pharmaceutical industry, greenhouses, cleanrooms, storerooms, and cold-storage rooms.
  • Measuring range: 0 to 100 % RH
  • Medium: air, pressureless
  • Separate probes for humidity & temperature
JUMO Wtrans receiver - Universal receiver for JUMO wireless measuring probes

JUMO Wtrans receiver
Universal receiver for JUMO wireless measuring probes Basic type: 902931
The Wtrans receiver T01, in combination with suitable Wtrans transmitters, is used for the mobile or stationary measurement of the following physical measurands: temperature, pressure, and humidity. The wireless sensor technology also works in a harsh industrial environment.
  • Signals (0(4) to 20 mA, 0 to 10 V)
  • RS485 interface
  • Open air range 300 m

item items, maximum number of items reached

We are at your service

We are at your service

We'll be happy to help – whether you have a technical concern, need to schedule an appointment, request a quote, or inquire about a price.
Contact us