Automation system

Reliable systems are needed to ensure that process and production processes run smoothly – especially when it comes to precise measurement, control, and automation. Count on JUMO for sophisticated automation and software solutions. Our comprehensive expertise in pressure measurement and automation as well as a wide product range enable us to offer tailored solutions for your process.

Filter

Displays

Sort by

New product

JUMO variTRON 500 touch

Touch panel with integrated central processing unit for the automation system Basic type: 705004

JUMO variTRON 500 touch is based on the JUMO JUPITER modular platform. The central processing unit, in combination with the proven input and output modules from JUMO, forms an overall system with integrated PLC (CODESYS V3.5) and enables visualization via touch panel.

Integrated touch panel in 7" and 10.1"
version with increased protection IP69K
On-board installation of I/O modules

Topseller

JUMO variTRON 500

Central processing unit for an automation system Basic type: 705002

JUMO variTRON 500 is based on the modular platform JUMO JUPITER. The central processing unit along with the tried-and-tested input and output modules (incl. controller module) of the measuring, control, and automation system JUMO mTRON T form an overall system and provide a PLC (CODESYS V3.5).

State-of-the-art interfaces such as OPC UA, MQTT
PROFINET IO, EtherCAT, Modbus-TCP/RTU
800 MHz quad-core processor

New product

JUMO variTRON 300

Central processing unit for automation system with optional wireless interface Basic type: 705003

JUMO variTRON 300 is a compact automation system. The central processing unit can also be used as a receiver for the wireless JUMO Wtrans sensors. A router module can be used to connect JUMO's proven input and output modules and to set up an overall system with integrated PLC (CODESYS V3.5).

Modern protocols (e.g. OPC UA, MQTT)
Customer-specific parameters (CPV editor)
JUMO Wtrans receiver (optional)

Topseller

JUMO mTRON T

Central processing unit Basic type: 705001

The central processing unit contains the process map of the application and manages the configuration and parameter data of the overall system. 9 program generators and extensive limit value monitoring functions are available for individual control tasks.

9 program generators
OPC server (CODESYS V3.5)
PLC according to IEC 61131-3

Topseller

JUMO Cloud

IoT platform for secure process management Basic type: 701810

The IoT platform for process visualization, data acquisition, evaluation, and archiving enables worldwide access to measurement data via common web browsers. The JUMO Cloud is characterized by high security as well as valuable visualization, alarm, and planning functions.

End-to-end encryption
Process visualization
Unlimited access

Topseller

JUMO smartWARE SCADA

Software for process monitoring and control Basic type: 701820

The SCADA software provides convenient access to measurement data via common web browsers and offers functions for process visualization as well as evaluation and archiving of the acquired data. JUMO smartWARE SCADA also supports manufacturing and work processes with valuable monitoring, alarm, and planning functions.

Across networks
Process visualization
Unlimited access

New product

JUMO smartWARE Evaluation

Software for evaluating and visualizing the measurement data recorded by JUMO variTRON Basic type: 701840

The browser-based software solution enables intuitive evaluation and visualization of process data recorded via the JUMO variTRON automation system. Individual dashboards allow targeted and fast access to recorded process data. Manipulation detection based on digital certificates ensures a very high degree of data security.

Software for JUMO variTRON
Evaluation of archived data
License model according to evaluation signals

New product

JUMO smartWARE Program

Software for editing process technology programs with JUMO variTRON Basic type: 701850

The browser-based software solution enables intuitive creation and editing of process technology programs as well as recipes with JUMO variTRON. As a result, plant manufacturers can define process steps and then link them into a program using the graphical editor. The plant user can control the program sequence via a connected web interface.

Software for JUMO variTRON
Edit process technology programs
Customizable graphical interface

New product

Router module 1-port

Module for automation system JUMO variTRON Basic type: 705043

The router module 1-port is a system component of the JUMO variTRON automation system. The module 1-port is primarily used together with a variTRON 300 central processing unit. It laterally provides the system bus output and power supply for connecting the input and output modules.

1 system bus connection
Galvanically isolated interfaces
Voltage supply output

New product

Digital input/output module 32-channel

Module for JUMO variTRON automation system Basic type: 705031

The module offers 32 channels. Of these, 17 are configured as digital outputs by default. Up to 3 option cards with 5 channels each can be used to add digital inputs and outputs. The digital input signals can be further processed in the JUMO variTRON central unit. The digital outputs forward signals that are transmitted by the system bus.

32 channels, thereof 17 digital outputs
up to 15 additional inputs or outputs
Signals: DC 0/24 V; Output: max. 500 mA

New product

Router module 2-port

Module for automation system JUMO variTRON Basic type: 705041

The 2-port router module extends the central unit of the JUMO variTRON automation system by 2 system bus outputs. In this way, the system bus can be transmitted to router modules 3-port (705042) on other DIN rails in the same or in other control cabinets at a distance of up to 100 m. This makes it possible to distribute input and output modules and to decentralize the automation system.

2 system bus connections
Galvanically isolated interfaces
Voltage supply output

New product

Router module 3-port

Module for automation system JUMO variTRON Basic type: 705042

With the 3-port router module, you can arrange the JUMO variTRON automation system in a decentralized and free way. It enables input and output modules to be distributed over several DIN rails or control cabinets. A maximum distance of 100 m is possible between 2 router modules or between the central unit and the router module.

3 system bus connections
Galvanically isolated interfaces
Voltage supply output

New product

JUMO smartCONNECT

Mobile access to JUMO devices via Bluetooth app. Basic type: 701895

The clever Bluetooth app provides intuitive and fast access to JUMO devices and is available for Android as well as iOS smartphones with NFC. Using state-of-the-art technology, it can later access other JUMO products in a flexible manner, configure them as required, and differentiate them using tag names. Actual process values can also be easily viewed. A demo helps with testing.

Configuration of devices
View actual process values
Bluetooth

JUMO mTRON T

Operating panels Basic type: 705065

The basic version of the JUMO mTRON T automation system includes the multifunction panel 840 with a screen size of 21.3 cm (8.4") as a standard feature. The additional operating panels allow the automation system to be configured with even greater flexibility.

Ethernet interface
3.5", 5.7", and 10.4" TFT color screens
IP65 protection on front

JUMO mTRON T

Multifunction panel 840 Basic type: 705060

The multifunction panel is used for simple and clear measured data visualization, operation, configuration, and parameterization of the system. As an interface between user and machine, the panel allows an optimal and clearly arranged insight into the process statuses and parameters of the system.

2 serial interfaces
2 RJ45 system bus connections
IP67 protection on front

Web panels

For automation system JUMO vari TRON Basic type: 705070

The web panels are easily connected to the JUMO variTRON automation system via Ethernet. They support CODESYS Remote TargetVisu or WebVisu. In this way, visualizations created with CODESYS can be displayed on the web panels and used to operate the system. The resitive or capacitive TFT-touchscreens are available in various sizes and resolutions.

up to 3 Ethernet interfaces
TFT-touchscreens 4.3 to 21.5 inch
Protection class on front: IP54 to IP69

JUMO mTRON T

Multichannel controller module Basic type: 705010

The multichannel controller module can be used for up to 4 PID control channels (cascadable). The standard version includes 2 high-quality universal analog inputs, 2 digital inputs (DC 0/24 V), and 2 digital outputs as relays with normally open contact (AC 230 V, 3 A) or as logic output (DC 0/15 V).

2 digital inputs DC 0/24 V
Counter input up to 10 kHz
2 digital outputs as a relay

JUMO mTRON T

Relay module 4-channel Basic type: 705015

The relay module provides 4 relay outputs, which are controlled via the system bus by digital signals (assignment in the connection list or directly by the PLC). Each relay output is equipped with a changeover contact AC 230 V/3 A.

4 relay outputs
Changeover contact AC 230 V; 3 A
Ambient temperature: -20 to +55 °C

JUMO mTRON T

Analog input module 4-channel Basic type: 705020

The analog input module 4-channel has 4 universal analog inputs with galvanic isolation. The digitized input values/states are available in the system for further processing.

4 universal analog inputs
16-bit A/D converter
1 digital input DC 0/24 V

JUMO mTRON T

Analog input module 8-channel Basic type: 705021

The analog input module 8-channel has 8 analog inputs for RTD temperature probes in a two-wire circuit, and 1 digital input (DC 0/24 V). The analog inputs are not galvanically isolated from each other.

8 analog inputs
16-bit A/D converter
1 digital input DC 0/24 V

JUMO mTRON T

Digital input/output module 12-channel Basic type: 705030

The module is equipped with 12 channels, which can be configured as digital inputs or digital outputs. The digitized input states are available in the system for further processing. The digital outputs are controlled via the system bus by digital signals.

12 digital inputs or outputs
Input signal: DC 0/24 V
Output signal: DC 0/24 V; max. 500 mA

JUMO mTRON T

Router module Basic type: 705040

The router module allows the automation system to be assigned freely and in a decentralized manner. The input and output modules can therefore be distributed across several DIN rails/control cabinets. The router modules can each be placed at distance of up to 100 m to one another/to the basic system.

3 system bus connections
Galvanically isolated interfaces
Voltage supply output

JUMO mTRON T

Analog output module 4-channel Basic type: 705025

The analog output module 4-channel is equipped with 4 outputs. The output signal, 0(2) to 10 V or 0(4) to 20 mA, can be configured individually for each channel. The analog outputs are controlled via the system bus.

4 analog outputs (user configurable)
0(2) to 10 V; 0(4) to 20 mA output
Ambient temperature: -20 to +55 °C

JUMO mTRON T

Power supply units Basic type: 705090

The special features of these DIN rail power supply units include their high level of efficiency and small size. Low sensitivity to transients and overvoltage as well as barely any electromagnetic radiation make usage possible in almost any environment.

150 % load capacity
AC 100 to 240 V wide-range input
Efficiency up to 93.5 %

We are at your service

We'll be happy to help – whether you have a technical concern, need to schedule an appointment, request a quote, or inquire about a price.