Cable Version

JUMO FOODtemp

Food insertion thermocouples Basic type: 901350

Due to their special construction, these robust, steam-tight food insertion thermocouples are especially suited to cooking, boiling, and baking processes in all food processing and food preservation applications. The stainless steel probe tube is available with a concentric or oblique probe tip.

Temp.: -100 to +260 °C
Suitable for the food industry
Thermocouple type K

Screw-in thermocouples

With compensating cable Basic type: 901050

Screw-in thermocouples are primarily used for measuring temperatures in liquids and gases. Depending on the version, the compensating cables are suitable for dry or humid rooms that have a temperature range from -20 to +350 °C.

Temp.: -200 to +600 °C
Stainless steel 1.4571
Thermocouples type K and L

Screw-in melt thermocouples

With sharp or flat probe tips Basic type: 901090

Screw-in melt thermocouples are predominantly used to acquire temperature measurements for melt temperatures in the plastics industry. Sharp or flat probe tips ensure optimum temperature acquisition depending on the requirements.

Temp.: -40 to +600 °C
Ceramic insulated probe tip
Thermocouples type J, K, and L

Mineral-insulated thermocouples

According to DIN 43710 and DIN EN 60584 with bare connection wires Basic type: 901210

Mineral-insulated thermocouples are made of a flexible, thin-walled sheath cable in which the thermocouple wires are embedded in compressed fire-resistant magnesium oxide. The good thermal transfer between the sheath and the thermocouple enables short response times and high measuring accuracy.

Temp.: -200 to +1200 °C
Thermocouples type J, K, L, N
Response time: t0.5 from 0.15 s

Mineral-insulated thermocouples

According to DIN 43710 and DIN EN 60584 with standard tab connector Basic type: 901240

Mineral-insulated thermocouples are made of a flexible, thin-walled sheath cable in which the thermocouple wires are embedded in compressed fire-resistant magnesium oxide. The good thermal transfer between the sheath and the thermocouple enables short response times and high measuring accuracy.

Temp.: -200 to +1200 °C
With standard tab connector
Response time: t0.5 from 0.15 s

Push-in thermocouples

With bayonet fastener Basic type: 901190

Push-in thermocouples with a bayonet fastener are predominantly used for temperature measurement in solid bodies, friction bearings, and tools (e.g. in the plastics industry). The special shape of the probe tip makes these temperature probes suitable for use in flat and pointed drilled holes.

Temp.: 0 to 400 °C
Compensating cable Silicone/PTFE/metal braiding
Thermocouples type J, K, and L

Mineral-insulated thermocouples

According to DIN 43710 and DIN EN 60584 with compensating cable Basic type: 901250

Mineral-insulated thermocouples are made of a flexible, thin-walled sheath cable in which the thermocouple wires are embedded in compressed fire-resistant magnesium oxide. The thermal transfer between the sheath and the thermocouple enables short response times and high measuring accuracy. A compression fitting allows mineral-insulated thermocouples for hydrogen applications up to over 1000 bar.

Temp.: -200 to +1200 °C
Thermocouples J, K, L
Response time: t0.5 from 0.15 s

Push-in thermocouples

With compensating cable Basic type: 901150

Push-in thermocouples are predominantly used for temperature measurement in solid bodies (e.g. heating plates and sealing jaws). The compensation cable is relieved of strain at the transition to the protection tube. Bend protection is available as an option.

Temp.: -50 to +600 °C
Stainless steel 1.4571
Thermocouples type J, K, and L

Cable Version

We are at your service